Delta AH500 series, Hardware Operation Manual

Page: 388 / 681

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
8 - 2 7
8.1.3.8 Ethernet – Advance: Email
Select the Email Function Enable checkbox, and then set the related parameters for the email-related
functions.

Select Email Function Enable to enable the function and then start setting the following parameters.

Set an IP address of SMTP server. Set the COM port of SMTP server at the COM port and set the
sender’s email box at local email address. Type a mail subject as the start of the subject of every
email.

Select Account identification checkbox to enable the function. Users can set to authenticate
themselves with a user name and a password before logging in to an SMTP server.

Type the target email address of a receiver.
Type a trigger name in Trigger Name box and a minimum interval in Trigger Min Cycle in the Trigger
Setting table. And then select a trigger condition on the drop-down list. When the sending condition is met, the
system will send an email every a period of time. But the same email will not be sent again within the set
interval.