Delta AH500 series, Hardware Operation Manual

Page: 613 / 681

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
1 2 - 6 4
Error
code
Description
CPU
Status
LED indicator status
ERROR
BUS
FAULT
16#0035
The setting of the communication type of COM1 is
incorrect. (SM9)
Continue Blinking Keep
16#0038
The communication setting of COM2 is incorrect.
(SM9)
Continue Blinking Keep
16#0039
The setting of the station address of COM2 is incorrect.
(SM9)
Continue Blinking Keep
16#003A
The setting of the communication type of COM2 is
incorrect. (SM9)
Continue Blinking Keep
16#0050
The memories in the latched special auxiliary relays
are abnormal.
Continue ON Keep
16#0051 The latched special data registers are abnormal. Continue ON Keep
16#0052
The memories in the latched auxiliary relays are
abnormal.
Continue ON Keep
16#0053 The latched timers are abnormal. Continue ON Keep
16#0054 The latched counters are abnormal. Continue ON Keep
16#0055 The latched 32-bit counters are abnormal. Continue ON Keep
16#0056 The memories in the latched timers are abnormal. Continue ON Keep
16#0057 The memories in the latched counters are abnormal. Continue ON Keep
16#0058
The memories in the latched 32-bit counters are
abnormal.
Continue ON Keep
16#0059 The latched data registers are abnormal. Continue ON Keep
16#005A The latched working registers are abnormal. Continue ON Keep
16#005B Abnormal SFC parameters Continue ON Keep
16#005D
The CPU module does not detect a memory card.
(SM453
）
Continue Blinking Keep
16#005E The memory card is initialized incorrectly. (SM453) Continue Blinking Keep
16#005F
The data is read from the inexistent file in the memory
card, or the data is written into the inexistent file in the
memory card. (SM453)
Continue Blinking Keep
16#0060
The default folder can not be created in the CPU
module. (SM453)
Continue Blinking Keep
16#0061
The capacity of the memory card is not large enough.
(SM453)
Continue Blinking Keep
16#0062 The memory card is write protected. (SM453) Continue Blinking Keep
16#0063
An error occurs when the data is written into the
memory card. (SM453)
Continue Blinking Keep
16#0064 The file in the memory card can not be read. (SM453) Continue Blinking Keep
16#0065 The file in the memory card is a read-only file. (SM453) Continue Blinking Keep
16#0066 An error occurs when the system is backupped. Continue Blinking Keep
16#0067
The size of the PLC parameters restored exceeds the
size of the PLC parameters of the CPU module.
Continue Blinking Keep
16#0068 Corrupted symbol table Stop Blinking Keep
16#0069 Corrutped EIP parameters Stop Blinking Keep
16#1001 The PLC CPU cannot read/write data on the modules. Continue Keep Blinking
16#1003
The mapped data between the PLC CPU and the
modules is not right.
Continue Keep Blinking
16#1400
An error occurs when the data is accessed through the
auxiliary processor. (SM9)
Stop Keep ON
16#1401
An error occurs when the data in the I/O module is
accessed. (SM9)
Stop Keep ON