Delta AH500 series, Hardware Operation Manual

Page: 438 / 681

Chapter 9
N e t w o r k C o n f i g u r a t i o n
9 - 3 5
9.2.8 Testing Routing
After the routing tables produced are downloaded, users can test routing by means of a function provided by
NWCONFIG.
T
he steps of testing routing are as follows.
(1)
The users have to make sure that all the nodes are wired according to the configuration in NWCONFIG,
and operate normally.
T
he setting of the devices has to be consistent with the setting in NWOCNIFG. In the
Select a Driver
window, the users have to select the
Routing Mode
checkbox, and select a device in the
First Station
drop
-
down list box. Please refer to section 9.1.3 for more information ab
out setting
communication.
(2) A
fter the users select the destination device toward which packets are relayed, they have to click
on
the toolbar, or
Routing Detect
on the
PLC menu.
The users can also right
-
click the destination device, and then click
Routing Detect
on the context menu.