Delta AH500 series, Hardware Operation Manual

Page: 387 / 681

C h a p t e r 8 H a r d w a r e C o n f i g u r a t i o n
8 - 2 6
8.1.3.7 Ethernet – Advance: NTP
Select the NTP Client Function Enable checkbox, and then set the related parameters to enable the function
of synchronizing the real-time clock in the CPU module to an NTP server, and carry out the related setting.

NTP Client Function Enable: Select this option to enable this function.

Update Cycle: Users can set the IP address of an NTP server. The CPU module corrects the time inside
itself by connecting to the server periodically. Users can set an interval of correcting the
time in the CPU module. If the interval is thirty minutes, the CPU module will connect to
the NTP server every thirty minutes.

Daylight Saving Enable: Select this option to enable this function.

After Daylight Saving Enable is selected, you can set the start and end of month, date and time of the
daylight saving.

Users can select a time zone in the Time Zone drop-down list box for the NTP.