manualshive.com logo in svg

Delta AH500 series, Hardware Operation Manual

Share
Download
Delta AH500 series Hardware Operation Manual Download Page 638

C h a p t e r   1 2   Tr o u b l e s h o o t i n g  

1 2 - 8 9  

12.4.8

 

AH10DNET-5A 

Error code 

Description 

LED indicator status 

CPU 

Module 

BUS FAULT 

MS 

NS 

16#A0F0 

The node ID of AH10DNET-5A is the 
same as other node ID on the network, 
or exceeds the range. 

The red light blinks. 

The green 

light blinks. 

The red light 

is ON. 

16#A0F1 

No slave is put in the scan list of 
AH10DNET-5A. 

The red light blinks. 

The green 

light blinks. 

The green 

light is ON. 

16#A0F2 

The working voltage of AH10DNET-5A 
is low. 

The red light blinks. 

The red light 

blinks. 

The red light 

blinks. 

16#A0F3 

AH10DNET-5A enters the test mode. 

The red light blinks. 

The orange 

light is ON. 

The orange 

light is ON. 

16#A0F4 

The bus of AH10DNET-5A is switched 
OFF. 

The red light blinks. 

The green 

light is ON. 

The red light 

is ON. 

16#A0F5 

AH10DNET-5A detects that there is no 
network power supply to the DeviceNet. 

The red light blinks. 

The red light 

blinks. 

The red light 

is ON. 

16#A0F6 

Something is wrong with the internal 
memory of AH10DNET-5A. 

The red light blinks. 

The red light 

is ON. 

The green 

light blinks. 

16#A0F7 

Something is wrong with the data 
exchange unit of AH10DNET-5A. 

The red light blinks. 

The red light 

is ON. 

The green 

light blinks. 

16#A0F8 

The product ID of AH10DNET-5A is 
incorrect. 

The red light blinks. 

The red light 

is ON. 

The green 

light blinks. 

16#A0F9 

An error occurs when the data is read 
from AH10DNET-5A, or when the data 
is written into AH10DNET-5A. 

The red light blinks. 

The red light 

is ON. 

The red light 

is ON. 

16#A0FA 

The node ID of AH10DNET-5A is the 
same as that of the slave set in the 
scan list. 

The red light blinks. 

The green 

light is ON. 

The red light 

is ON. 

16#A0FB 

The data exchange between 
AH10DNET and AH CPU failed. 

The red light blinks. 

The green 

light is ON.

 

The green 

light is ON.

 

16#A0FC 

Errors occur in the slaves, on the 
module of an AHRTU-DNET 
backplane, or on the AHRTU-DNET 
backplane connection. 

The red light blinks. 

The red light 

blinks. 

The green 

light is ON.

 

 

Summary of Contents for AH500 series










































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands