Delta AH500 series, Hardware Operation Manual

Page: 418 / 681

Chapter 9
N e t w o r k C o n f i g u r a t i o n
9 - 1 5

Method 2
Select a PLC or a rack in the working area, and then double
-
click a
network
module on the device list.
A
fter the users add a network module to a node, the slot in which the network module
is
installed, and the
backplane on which the network module is installed may be different from the actual slot in which the
network module is installed, and the actual
backplane on which the network module is installed.
T
he users
have to adjust the properties of the node. Please refer to section 9.2.4 for more information about setting
pro
perties of a node, and section 9
.2.2 for more information
about the marking of a port in NWCONFIG.
9.2.2 Connecting to a Network
After users deploy the nodes in the NWCONFIG window, they can connect the nodes to the networks
designed.
T
here are three ways to add a network to the working area
. T
here are Ethernet networks and RS
-485
networks.

Method 1
After users
click on the toolbar, an Ethernet network is added. After the user
s
click on the
toolbar, an RS
-
485 network is added.