Delta AH500 series, Hardware Operation Manual

Page: 312 / 681

C h a p t e r 6 W r i t i n g a P r o g r a m
6 - 7
6.4.2 Setting the Parameters in a CPU Module and a Module
After AH16AP11R-5A is configured, users can set the parameters in the CPU module and the parameters in
the extension module. A
fter the users double
-click the CPU module or the extension module, a corresponding
window will appear.
After the CPU module
is double
-clicked, the PLC Parameter Setting window will appear.
T
he users can click
the primary tabs at the top of the window, and the secondary tables at the bottom of the window to set the
parameters. I
n this example, the users only need to define the n
ame of the CPU module.
After the users click the CPU
tab at the top of the window, and the
Name
tab at the bottom of the window, they
can type a name in the
Name
box. The users will find the default name in the
Name
box is the same as
the
project name. Del
ete the default name, type
“Main_Controller” in the Name
box, and click
OK .
A
fter the users double
-click AH16AP11R-5A, the Parameter Setting window will appear.