Delta AH500 series, Hardware Operation Manual

Page: 417 / 681

A H 5 0 0
Hardware and Operation Manual
9 - 1 4
configuration in NWCONFIG.
B
esides, the users can directly connect network modules to the DVP series
PLCs in the NWCONFIG window.
There are two ways to add a network module to the working area.

Method 1
Select a network module on the device list, and then drag it to a PLC in the working area.
If the PLC does not support the network module selected, the mouse cursor becom
es .
A
n AH10EN series module can only be put on a main backplane. Eight AH10EN series modules at most
can be put on a main backplane.
An AH
10SCM series module can be put on an extension backplane.
T
he
number of
AH
10SCM series modules which can be put on a backplane depends on the number of slots on
the backplane.
U
sers can choose a backplane to which an AH10SCM series module is dragged.
A
fter the users drag an AH10SCM series module to at the right side of a node, an extension rack will
be added to the node.