Delta AH500 series, Hardware Operation Manual

Page: 419 / 681

A H 5 0 0
Hardware and Operation Manual
9 - 1 6

Method 2
Click the
Edit
menu, point to
Add a Networ
k, and click
Ethernet or RS-485 .

Method 3
Right
-
click the blank in the working area, point to
Add a Network
on the context menu, and click
Ethernet or RS-485 .
T
he ports of a device are displayed at the bottom of the device
.
If a port is blue, it is an RS
-485 port.
I
f a port is
green, it is an Ethernet port.
T
he port number assigned to a port of a device is consistent with the definition of
the
port.
For example, E1 represents the
first
Ethernet port, C1 represents COM1, and C2 represents COM
2.
The p
orts of an AH
10SCM series module are marked with TR1 and TR2, and the port
s of an
AH10EN series
module
are
marked with X1 and X2. Besides, if the IP address assigned to an Ethernet port is a dynamic IP
address, or
a port of an AH
10SCM series module is not
a
Modbus
port
, the Ethernet
port
or the port of the
AH10SCN series module will be gray, and can not connect to any network
.