Delta AH500 series, Hardware Operation Manual

Page: 319 / 681

A H 5 0 0 H a r d w a r e a n d
Operation Manual
6 - 1 4
6.5.3 Basic Editing
-
Inserting a Network and Typing an Instruction
After
on the toolbar is clicked, a network will be
under the network selected. After
on the toolbar is
clicked, a network will be
put
above the network selected.
In this example, a network is under network 1.
A
contact and a coil can be created not only by clicking
and
on the toolbar, but also by typing
instructions.
(1) Click the line in network 2.
(2)
Type the IL instructio
n “LD M0”. (
The
instruction is case-insensitive.) As soon as the IL instruction is
typed, a box which can be edited appears.
A
fter the typing
of the IL instruction is complete, users can
press Enter on the keyboard or click
OK
at the right side of the box.