DVP15MC11T Operation Manual
11
1
2. When the rotary cut function is performed, the rotary cut axis can only execute APF_RotaryCut_Out
and MC_Stop instruction and other instructions are invalid.
Output Update Timing
Name
Timing for changing to TRUE
Timing for changing to FALSE
Done
When rotary-cut relationship
disconnecting is completed.
When
Execute
changes from
TRUE to FALSE after the
instruction execution is completed.
Done
changes to TRUE when the
instruction execution is completed
after
Execute
changes from TRUE
to FALSE during the instruction
execution. One cycle later,
Done
changes to FALSE.
Busy
When
Execute
changes to TRUE
When
Done
changes to TRUE.
When
Error
changes to TRUE.
Error
When an error occurs in the
instruction execution or the input
parameters for the instruction are
illegal.
When
Execute
changes from
TRUE to FALSE
Function
APF_RotaryCut_Out is used for disconnecting the already established rotary-cut relationship between
the rotary-cut axis and feed axis. After the rotary-cut relationship is disconnected, the knife of the
rotary-cut axis will stop at the entry position and will not follow the feed axis for motion any more.
The instruction has no impact on the motion of the feed axis.
11-188
Summary of Contents for DVP15MC11T
