Delta Electronics DVP15MC11T, Operation Manual

Page: 242 / 601

Chapter 8 Logic Instructions
8_
8.12.5 Times,dates_TO_***
FB/FC Explanation
Applicable
model
FC
Times, dates_TO_*** instructions convert Time or date data into the data of
basic data types. “***” can be any basic data type.
DVP15MC11T

Parameters
Parameter
name
Meaning Input/ Output Description Valid range
In Data to convert Input Data to convert
Depends on the data type of the
variable that the input parameter is
connected to.
Out Conversion result Output Conversion result
Depends on the data type of the
variable that the output parameter is
connected to.
B
ool
ean
Bit string Integer
Real
number
Time, date
St
rin
g
B
O
O
L
BYT
E
WO
RD
D
WO
R
D
L
W
O
R
D
U
SI
N
T
U
IN
T
U
DI
NT
U
L
INT
SI
N
T
IN
T
D
IN
T
L
IN
T
R
EAL
L
R
EAL
T
IM
E
D
AT
E
TOD D
T
ST
R
IN
G
In
● ● ● ●
Out The data type of Out must be the same as “***” of the instruction name.
Note:
The symbol
●
indicates that the parameter is allowed to connect to the variable or constant of the data type.

Function Explanation

Time and Date to Bool, Bit String, Integer, Real Number and String
The rule for the conversion of the time and date into the bool, bit string, integer, real number and
string is the same as that for the conversion of the unsigned integer into bool, bit string, integer, real
number and string. Refer to section 8.13.5 for details.

Time and Date to Time and Date

The time and date data can be converted to each other. And some instructions are shown
below.
The rule for the conversion of the time and date data into the time and date data is the same as
that for the conversion of unsigned integers into unsigned integers. The units must be uniform
during the conversion. The unit of TIME is ns (nanosecond) and the unit of others is ms
(millisecond).
Time s dates _TO_* **
,
EN ENO
O ut In
TIME_TO_DATE
EN ENO
O ut In
DATE_TO_TI ME
EN ENO
O ut In
TI ME_TO_TOD
EN ENO
O ut In
TO D_TO _DT
EN ENO
O ut In
8-171