Delta Electronics DVP15MC11T, Operation Manual

Page: 157 / 601

DVP15MC11T Operation Manual
_8

Users can choose different data types for the input parameter in this instruction. But the data type of
the output parameter is restricted to LREAL. An error will occur during the compiling of the software
if the data type of the output parameter is not LREAL.

Precautions for Correct Use

The input variable is not allowed to omit. An error will occur during the compiling of the software if
the input variable is omitted. But the output variable is allowed to omit.

The value of Out varies between -
π/2 and π/2 when the value of
In changes between -1.0 and 1.0.
The instruction will not go to the error state if the value of In is out of -1.0 ~1.0 and the value of Out is
nonnumeric as shown in the following table and program.
The variable table and program
Variable name Data type Current value
ASIN_EN BOOL TRUE
ASIN_In REAL 2.0
Out1 LREAL 1.#QNAN
1
ASI N
EN E NO
In Out
AS IN_EN
A SIN_I n Ou t1

Programming Example

The data types of variables ASIN_In and Out1 are REAL and LREAL respectively. The value of
Out1 is 1.5707963267949 if the value of ASIN_In is 1.0 when ASIN_EN changes to TRUE. The
value of Out1 is -1.5707963267949 as ASIN_In is -1.0.

Variable 1
Variable name Data type Current value
ASIN_EN BOOL TRUE
ASIN_In REAL 1.0
Out1 LREAL 1.5707963267949

Variable 2
Variable name Data type Current value
ASIN_EN BOOL TRUE
ASIN_In REAL -1.0
Out1 LREAL -1.5707963267949
O ut
I n
2
2
-
0 1,0 - 1, 0
I n I nput dat a Sine
:
( )
O ut : As ine in r adians
( )
π
π
8-86