Delta Electronics DVP15MC11T, Operation Manual

Page: 301 / 601

DVP15MC11T Operation Manual
10
See the completion output parameters of instructions in the following table so as to judge the instruction
execution state in a buffer mode.
Instruction name
Is it a buffered
instruction?
(Yes or No)
Can it be followed
by a buffered
instruction?
(Yes or No)
Completion output
parameter of an
instruction
MC_Home No No Done
MC_Stop No No Done
MC_Halt Yes Yes Done
MC_MoveAbsolute Yes Yes Done
MC_MoveRelative Yes Yes Done
MC_MoveAdditive Yes Yes Done
MC_MoveSuperimposed No No ——
MC_HaltSuperimposed No No ——
MC_MoveVelocity Yes Yes InVelocity
MC_CamIn Yes Yes EndOfProfile
MC_CamOut No Yes Done
MC_GearIn Yes Yes InGear
MC_GearOut No Yes Done
MC_CombineAxes Yes Yes InSync

Examples of Buffer Modes
Example 1
The following example explains six buffer modes for the switch from the execution of one MC_MoveRelative
instruction to the other MC_MoveRelative instruction.
The variable table and program
Variable name Data type Initial value
Pwr MC_Power
Axis1 USINT 1
Pwr_BM MC_Buffer_Mode 0
Pwr_Sta BOOL
Pwr_Bsy BOOL
Pwr_Act BOOL
Pwr_Err BOOL
Pwr_ErrID WORD
Rel1 MC_MoveRelative
Rel1_Ex BOOL FALSE
Rel1_BM MC_Buffer_Mode 0
Rel1_Done BOOL
Rel1_Bsy BOOL
Rel1_Act BOOL
Rel1_Abt BOOL
Rel1_Err BOOL
Rel1_ErrID WORD
Rel2 MC_MoveRelative
10-12