DVP15MC11T Operation Manual
_5
3.
Keep enough space for air ventilation.
4.
The fan or air conditioner must be installed if the environment temperature is higher than 55°C.
Notes:
1. The control cabinet of the height 1.0m~2.0m is easy for installation and operation.
2. Make the installation away from the high-voltage equipment and power equipment.
3. The power supply in the control cabinet must be cut before installation.
5.2.4
Actions for Anti-interference
Do not install the controller in the control cabinet where there is high-voltage equipment.
Please keep at least 200mm far away from the power wire for the installation.
There should be a grounding wire for the control cabinet.
5.2.5
Dimension Requirement in the Control Cabinet
Installation Figure
DVP15MC11T has to be installed in an
enclosure. In order to ensure that the
controller radiates heat normally, the space
between the controller and the enclosure has
to be larger than 50 millimeters. D > 50mm
5-8
Summary of Contents for DVP15MC11T
