manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 85

AAA Commands

85

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

p

asswo

r

ds histo

r

y

The 

passwords history 

Global Configuration mode command sets the number of required 

password changes before a password in the local database can be reused. To remove this 
requirement, use the 

no

 form of this command.

Syntax

passwords history 

number

no passwords history

•

number—

Indicates the required number of password changes before a password can be 

reused. (Range: 1-10). 

Default Configuration

No required number of password changes before reusing a password.

Command Mode

Global Configuration mode

User Guidelines

•

Relevant to local user passwords, line passwords, and enable passwords.

•

Password history is not checked during the configuration download.

•

Password history is saved even if the feature is disabled.

•

A user’s password history is saved as long as the user is defined.

•

If the user enters a password that is identical to the previously used one, the password is not 
included in the password history count. This is required to enable the user to modify privilege 
level or aging, without having to change passwords.

Example

The following example configures the required number of password changes before a password 
can be reused to 3.

p

asswo

r

ds histo

r

y hold-ti

m

e

The 

passwords history hold-time 

Global Configuration mode command configures the number 

of days a password is relevant for tracking its password history. To return to the default 
configuration, use the

 no

 form of this command.

Console(config)# 

passwords history

 3

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands