manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 348

348

SSH Commands

www

.dell.com | support.dell.com

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Command Mode

Global Configuration mode

User Guidelines

•

Use this command to generate RSA key pairs Secure Copy.

•

RSA keys are generated in pairs: one public RSA key and one private RSA key. If the device 
already has Slogin RSA keys, a warning and prompt to replace the existing keys with new keys 
are displayed.

•

This command is not saved in the device configuration; however, the keys generated by this 
command are saved in the private configuration, which is never displayed to the user or 
backed up on another device. 

•

This command may take a considerable period of time to execute.

Example

This example generates RSA key pairs for secure login to remote access servers.

show c

r

y

p

to slogin key 

m

y

p

ubkey

The 

show crypto slogin key mypubkey

 Privileged EXEC mode command displays the secure 

login public keys of the device.

Syntax

show crypto slogin key mypubkey [rsa | dsa]

•

rsa

 — Indicates the RSA key.

•

dsa

 — Indicates the DSA key.

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Console# 

config

Console(config)# 

crypto slogin key generate rsa

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands