Dell PowerConnect 3400 Series Cli Reference Manual Download Page 60

Page: 60 / 456

Command Modes

www

.dell.com | support.dell.com

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

SP (SSH Public Key) Mode

UE (Use

EXEC) Mode

show snmp views

Displays the configuration of SNMP views.

show spanning-tree

Displays spanning tree configuration.

show startup-config

Displays the startup configuration file contents.

show syslog-servers

Displays the syslog servers settings.

show tacacs

Displays configuration and statistics for a servers.

show users accounts

Displays information about the local user database.

show users login-history

Displays information about the login history of users.

show vlan internal usage

Displays a list of VLANs used internally by the device.

show vlan mac-to-vlan

Displays the MAC-to-VLAN database.

show vlan private-vlan

Displays information about private VLANs.

stack reload

Reloads stack members

test copper-port tdr

Diagnoses with TDR (Time Domain Reflectometry) technology the
quality and characteristics of a copper cable attached to a port.

Command

Description

key-string

Manually specifies a SSH public key.

user-key

Specifies which SSH public key is manually configured and enters
the SSH public key-string configuration command

Command

Description

clear counters

Clears statistics on an interface.

enable

Enters the Privileged EXEC mode.

exit

Closes an active terminal session by logging off the device.

Changes a login username.

ping

Sends ICMP echo request packets to another node on the network.

show clock

Displays the time and date from the system clock.

show copper-ports cable-
length

Displays the estimated copper cable length attached to a port.

show copper-ports tdr

Displays the last TDR (Time Domain Reflectometry) tests on
specified ports.

show gvrp configuration

Displays GVRP configuration information.

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 3400 Series

Reviews:

Brands by name

Popular brands

Dell PowerConnect 3400 Series, Cli Reference Manual

Search results

Summary of Contents for PowerConnect 3400 Series

Reviews:

Brands by name

Popular brands