manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 429

Web Server

429

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

•

common- name

 — Specifies the fully qualified URL or IP address of the device. 

(Range: 1- 64)

•

organization-unit

 — Specifies the organization-unit or department name. (Range: 1- 64)

•

organization

 — Specifies the organization name. (Range: 1- 64)

•

location

 — Specifies the location or city name. (Range: 1- 64)

•

state

 — Specifies the state or province name. (Range: 1- 64)

•

country

 — Specifies the country name. (Range: 1- 2)

Default Configuration

There is no default configuration for this command.

Command Mode

Privileged EXEC mode

User Guidelines

•

Use this command to export a certificate request to a Certification Authority. The certificate 
request is generated in Base64-encoded X.509 format.

•

Before generating a certificate request you must first generate a self-signed certificate using 
the

 crypto certificate generate

 Global Configuration mode command. Be aware that you have 

to reenter the certificate fields.

•

After receiving the certificate from the Certification Authority, use the 

crypto certificate 

import

 Global Configuration mode command to import the certificate into the device. This 

certificate replaces the self-signed certificate.

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands