228
Management ACL
www
.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY
Default Configuration
This command has no default configuration.
Command Mode
Management Access-list Configuration mode
User Guidelines
•
Rules with Ethernet, VLAN and port-channel parameters are valid only if an IP address is
defined on the appropriate interface.
•
The system supports up to 128 management access rules.
Example
The following example denies all ports in the access list called mlist.
m
anage
m
ent access-class
The
management access-class
Global Configuration mode command restricts management
connections by defining the active management access list. To disable this restriction, use the
no
form of this command.
Syntax
management access-class
{
console-only
|
name
}
no management access-class
•
name
— Specifies the name of the access list to be used. (Range: 1-32 characters)
•
console-only
— Indicates that the device can be managed only from the console.
Default Configuration
If no access list is specified, an empty access list is used.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Console(config)#
management access-list
mlist
Console(config-macl)#
deny
