manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 285

SNMP Commands

285

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Default Configuration

No group entry exists.

Command Mode

Global Configuration mode

User Guidelines

The index of the group name table is comprised of Group Name, Security Model, and 
Security Level. Different views for the same group can be defined with different security 
levels. For example, after having created the appropriate views, a group can be created for 
which "no authentication" is required, while allowing only notification view for "interfaces". 
A group of the same name can be created for which "priv" authentication is required. Read 
views can, for example, be configured for this group for mib2, and write views for interfaces. 
In this case, users in this group who send "priv" packets can modify all "interfaces" MIBs and 
view all mib2.

Examples

The following example attaches a group called user-group to SNMPv3 and assigns to the group 
the privacy security level and read access rights to a view called user-view.

sn

mp

-se

r

ve

r

 use

r

The 

snmp-server user 

Global Configuration mode command configures a new SNMP Version 3 

user. To remove a user, use the 

no

 form of this command.

Syntax

snmp-server user 

username

 

groupname

 [remote 

engineid-string

] [ auth-md5 

password 

| auth-

sha 

password

 |  auth-md5-key 

md5-des-keys

 | auth-sha-key 

sha-des-keys

 ]

no snmp-server user

 

username 

[remote

 

engineid-string

]

•

username

—Specifies the name of the user on the host that connects to the agent. (Range: 

1-30 characters)

•

groupname

—Specifies the name of the group to which the user belongs. (Range: 1-30 

characters)

•

engineid-string

—Specifies the engine ID of the remote SNMP entity to which the user 

belongs. The engine ID is a concatenated hexadecimal string. Each byte in the 
hexadecimal character string is two hexadecimal digits. Each byte can be separated by a 
period or colon. (Range: 5-32 characters)

Console(config)# 

snmp-server group

 user-group 

v3 priv read 

user-view

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands