manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 286

286

SNMP Commands

www

.dell.com | support.dell.com

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

•

auth-md5 

password

—Indicates the HMAC-MD5-96 authentication level. The user 

should enter a password for authentication and generation of a DES key for privacy. 
(Range: 1-32 characters)

•

auth-sha 

password

—Indicates the HMAC-SHA-96 authentication level. The user should 

enter a password for authentication and generation of a DES key for privacy. (Range: 1-32 
characters)

•

auth-md5-key 

md5-des-keys

—Indicates the HMAC-MD5-96 authentication level. The 

user should enter a concatenated hexadecimal string of the MD5 key (MSB) and the 
privacy key (LSB). If authentication is only required, 16 bytes should be entered; if 
authentication and privacy are required, 32 bytes should be entered. Each byte in the 
hexadecimal character string is two hexadecimal digits. Each byte can be separated by a 
period or colon. (16 or 32 bytes)

•

auth-sha-key 

sha-des-keys

—Indicates the HMAC-SHA-96 authentication level. The user 

should enter a concatenated hexadecimal string of the SHA key (MSB) and the privacy 
key (LSB). If authentication is only required, 20 bytes should be entered; if 
authentication and privacy are required, 36 bytes should be entered. Each byte in the 
hexadecimal character string is two hexadecimal digits. Each byte can be separated by a 
period or colon. (20 or 36 bytes)

Default Configuration

No group entry exists.

Command Mode

Global Configuration mode

User Guidelines

•

If auth-md5 or auth-sha is specified, both authentication and privacy are enabled for the user.

•

When a 

show running-config

 Privileged EXEC mode command is entered, a line for this user 

will not be displayed. To see if this user has been added to the configuration, type the 

show 

snmp users

 Privileged EXEC mode command.

•

An SNMP EngineID has to be defined to add SNMP users to the device. Changing or 
removing the SNMP EngineID value deletes SNMPv3 users from the device’s database.

•

The remote engineid designates the remote management station and should be defined to 
enable the device to receive informs.

Examples

The following example configures an SNMPv3 user 

John 

in group 

user-group

.

Console(config)# 

snmp-server user

 John user-group

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands