manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 183

IGMP Snooping Commands

183

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Example

The following example enables automatic learning of multicast router ports on VLAN 2.

i

p

 ig

mp

 snoo

p

ing host-ti

m

e-out

The 

ip igmp snooping host-time-out 

Interface Configuration (VLAN) mode command 

configures the host-time-out. If an IGMP report for a multicast group was not received for a 
host-time-out period from a specific port, this port is deleted from the member list of that 
multicast group. To return to the default configuration, use the 

no 

form of this command.

Syntax

ip igmp snooping host-time-out 

time-out

no ip igmp snooping host-time-out

•

time-out

 — Host timeout in seconds. (Range: 1 - 2147483647)

Default Configuration

The default host-time-out is 260 seconds.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

The timeout should be at least greater than 2*query_imax_response_time of the 
IGMP router.

Example

The following example configures the host timeout to 300 seconds.

i

p

 ig

mp

 snoo

p

ing 

mr

oute

r

-ti

m

e-out

The 

ip igmp snooping mrouter-time-out 

Interface Configuration (VLAN) mode command 

configures the mrouter-time-out. The 

ip igmp snooping mrouter-time-out

 Interface 

Configuration (VLAN) mode command is used for setting the aging-out time after multicast 
router ports are automatically learned. To return to the default configuration, use the 

no 

form of 

this command.

Console(config) # 

interface vlan 

2

Console(config-if)# 

ip igmp snooping mrouter learn-pim-dvmrp

Console(config)# 

interface vlan 

2

Console(config-if)# 

ip igmp snooping host-time-out

 300

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands