manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 444

444

802.1x Commands

www

.dell.com | support.dell.com

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Examples

The following example sets the number of times that the device sends an EAP-request/identity 
frame to 6 .

dot1x ti

m

eout su

pp

-ti

m

eout

The 

dot1x timeout supp-timeout 

Interface Configuration mode command sets the time for the 

retransmission of an Extensible Authentication Protocol (EAP)-request frame to the client. To 
return to the default configuration, use the 

no

 form of this command.

Syntax

dot1x timeout supp-timeout

 

seconds

 

no dot1x timeout supp-timeout

•

seconds — 

Time in seconds that the device waits for a response to an EAP-request frame 

from the client before resending the request. (Range: 1- 65535 seconds)

Default Configuration

Default timeout period is 30 seconds.

Command Mode 

Interface configuration (Ethernet) mode

User Guidelines 

•

The default value of this command should be changed only to adjust for unusual 
circumstances, such as unreliable links or specific behavioral problems with certain clients. 
and authentication servers

Examples

The following example sets the timeout period before retransmitting an EAP-request frame to 
the client to 3600 seconds.

dot1x ti

m

eout se

r

ve

r

-ti

m

eout

The 

dot1x timeout server-timeout

 Interface Configuration mode command sets the time that 

the device waits for a response from the authentication server. To return to the default 
configuration, use the 

no

 form of this command.

Console(config)# 

interface ethernet 

1/e16

Console(config-if)# 

dot1x max-req 

6

Console(config-if)

#

 

dot1x timeout supp-timeout 

3600

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands