manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 137

Configuration and Image Files

137

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Copying a Configuration File from a Server to the Running Configuration File

To load a configuration file from a network server to the running configuration file of the device, 
enter the 

copy 

source-url

 running-config

 command. The commands in the loaded configuration 

file are added to those in the running configuration file as if the commands were typed in the 
command-line interface (CLI). Thus, the resulting configuration file is a combination of the 
previous running configuration and the loaded configuration files with the loaded configuration 
file taking precedence.

Copying a Configuration File from a Server to the Startup Configuration

To copy a configuration file from a network server to the startup configuration file of the device, 
enter 

copy 

source-url 

startup-config

. The startup configuration file is replaced by the copied 

configuration file.

Storing the Running or Startup Configuration on a Server

Use the 

copy running-config 

destination-url

 

command to copy the current configuration file to 

a network server using TFTP. Use the 

copy startup-config 

destination-url

 command to copy the 

startup configuration file to a network server.

Saving the Running Configuration to the Startup Configuration

To copy the running configuration to the startup configuration file, enter the 

copy running-

config startup-config

 command. 

Backing up the Running or Startup Configuration to a Backup Configuration File

To copy the running configuration file to a backup configuration file, enter the 

copy running-

config file 

command. To copy the startup configuration file to a backup configuration file, enter 

the 

copy startup-config file

 command. 

Before copying from the backup configuration file to the running configuration file, make sure 
that the backup configuration file is not corrupt.

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands