manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 441

802.1x Commands

441

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Examples

The following example sets the number of seconds between re-authentication attempts, to 300.

dot1x 

r

e-authenticate

The 

dot1x re-authenticate

 Privileged EXEC mode command manually initiates a re-

authentication of all 802.1X-enabled ports or the specified 802.1X-enabled port.

Syntax

dot1x re-authenticate

 [

ethernet 

interface

]

•

interface

 — Valid Ethernet port. (Full syntax: 

unit/port

)

Default Configuration

This command has no default configuration.

Command Mode 

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Examples

The following command manually initiates a re-authentication of 802.1X-enabled Ethernet port 
1/e16.

dot1x ti

m

eout quiet-

p

e

r

iod

The 

dot1x timeout quiet-period

 Interface Configuration mode command sets the number of 

seconds that the device remains in the quiet state following a failed authentication exchange 
(for example, the client provided an invalid password). To return to the default configuration, 
use the 

no

 form of this command.

Console(config)# 

interface ethernet 

1/e16

Console(config-if)# 

dot1x timeout re-authperiod 

300

Console# 

dot1x re-authenticate ethernet 

1/e16

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands