manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 127

Clock

127

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Syntax

sntp client enable

no sntp client enable

Default Configuration

The SNTP client is disabled on an interface.

Command Mode

Interface configuration (Ethernet, port-channel, VLAN) mode

User Guidelines

•

Use the 

sntp broadcast client enable

 Global Configuration mode command to enable 

broadcast clients globally.

•

Use the 

sntp anycast client enable

 Global Configuration mode command to enable anycast 

clients globally.

Examples

The following example enables the SNTP client on Ethernet port 1/e3. 

snt

p

 unicast client enable

The 

sntp unicast client enable

 Global Configuration mode command enables the device to use 

the Simple Network Time Protocol (SNTP) to request and accept SNTP traffic from servers. To 
disable requesting and accepting SNTP traffic from servers, use the 

no

 form of this command.

Syntax

sntp unicast client enable

no sntp unicast client enable

Default Configuration

The SNTP unicast client is disabled.

Command Mode

Global Configuration mode

Console(config)# 

interface ethernet

 1/e3

Console(config-if)# 

sntp client enable

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands