manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 403

VLAN Commands

403

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Example

This example configures VLAN 200 as the primary private VLAN.

pr

ivate-vlan isolated

The 

private-vlan isolated

 Interface Configuration mode command configures the isolated 

VLAN of the PVLAN. To return to the default configuration, use the 

no

 form of this command.

Syntax

private-vlan isolated 

vlan-id

no private-vlan isolated

•

vlan-id

 — Specifies the ID of the isolated VLAN.

Default Configuration

No VLAN is configured.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

•

This command creates an isolated VLAN and associates it with the primary VLAN.

•

The command is executed in the context of the primary VLAN. 

•

An isolated VLAN can only be associated with one primary VLAN.

•

A VLAN that has been configured as an isolated VLAN cannot be configured as a primary or 
community VLAN.

•

The command is not supported under the command 

interface range vlan

.

Console# 

config

Console(config)# 

vlan database

Console(config-vlan)# 

vlan

 200

Console(config-vlan)# 

exit

Console(config)# 

interface vlan

 200

Console(config-if)# 

private-vlan primary

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands