manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 284

284

SNMP Commands

www

.dell.com | support.dell.com

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Examples

The following example creates a view that includes all objects in the MIB-II system group except 
for sysServices (System 7) and all objects for interface 1 in the MIB-II interface group.

sn

mp

-se

r

ve

r

 g

r

ou

p

The 

snmp-server group 

Global Configuration mode command configures a new Simple 

Management Protocol (SNMP) group or a table that maps SNMP users to SNMP views. To 
remove a specified SNMP group, use the 

no

 form of this command.

Syntax

snmp-server group

 

groupname 

{v1 | v2 | v3 {noauth | auth | priv} [notify

 

notifyview

 

] } 

[read

 

readview

] [write

 

writeview

]

 

no snmp-server group 

groupname

 {v1 | v2 | v3 [noauth | auth | priv]}

•

groupname

—Specifies the name of the group. 

•

v1

—Indicates the SNMP Version 1 security model.

•

v2

—Indicates the SNMP Version 2 security model.

•

v3

—Indicates the SNMP Version 3 security model.

•

noauth

—Indicates no authentication of a packet. Applicable only to the SNMP Version 3 

security model.

•

auth

—Indicates authentication of a packet without encrypting it. Applicable only to the 

SNMP Version 3 security model.

•

priv

—Indicates authentication of a packet with encryption. Applicable only to the SNMP 

Version 3 security model.

•

readview

—Specifies a string that is the name of the view that enables only viewing the 

contents of the agent. If unspecified, all objects except for the community-table and 
SNMPv3 user and access tables are available.

•

writeview

—Specifies a string that is the name of the view that enables entering data and 

configuring the contents of the agent. If unspecified, nothing is defined for the write 
view.

•

notifyview

—Specifies a string that is the name of the view that enables specifying an 

inform or a trap. If unspecified, nothing is defined for the notify view. Applicable only to 
the SNMP Version 3 security model.

Console(config)# 

snmp-server view

 user-view system 

included

 

Console(config)# 

snmp-server view

 user-view system.7 

excluded

 

Console(config)# 

snmp-server view

 user-view ifEntry.*.1 

included

 

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands