manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 152

152

Ethernet Configuration Commands

www

.dell.com | support.dell.com

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

•

Commands under the interface range context are executed independently on each active 
interface in the range. If the command returns an error on one of the active interfaces, it does 
not stop executing commands on other active interfaces.

Example

The following example shows how ports 5/e18 to 5/e20 and 3/e1 to 3/24 are grouped to receive 
the same command.

shutdown

The 

shutdown 

Interface Configuration (Ethernet, port-channel) mode command disables an 

interface. To restart a disabled interface, use the 

no 

form of this command.

Syntax

shutdown

no shutdown

Default Configuration

The interface is enabled.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

There are no user guidelines for this command.

Examples

The following example disables Ethernet port 1/e5 operations.

Console(config)# 

interface range ethernet

 5/e18-5/e20,3/e1-3/e24

Console(config-if)#

Console(config)# 

interface ethernet 

1/e5

Console(config-if)# 

shutdown

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands