manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 314

314

Spanning-Tree Commands

www

.dell.com | support.dell.com

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

s

p

anning-t

r

ee 

m

st 

p

o

r

t-

pr

io

r

ity

The

 spanning-tree mst port-priority 

Interface Configuration mode command configures port 

priority for the specified MST instance. To return to the default configuration, use the 

no 

form 

of this command.

Syntax

spanning-tree mst 

instance-id

 

port-priority

 

priority

no spanning-tree mst 

instance-id

 

port-priority

•

instance-ID—

ID of the spanning tree instance. (Range: 1-15)

•

priority—

The port priority. (Range: 0 - 240 in multiples of 16)

Default Configuration

The default port priority for IEEE Multiple Spanning Tree Protocol (MSTP) is 128.

Command Modes 

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures the port priority of port 1/e1 for instance 1 to 142.

s

p

anning-t

r

ee 

m

st cost

The 

spanning-tree mst cost 

Interface Configuration mode command configures the path cost 

for multiple spanning tree (MST) calculations. If a loop occurs, the spanning tree considers path 
cost when selecting an interface to put in the forwarding state. To return to the default 
configuration, use the 

no 

form of this command.

Syntax

spanning-tree mst 

instance-id

 

cost 

cost

no spanning-tree mst 

instance-id

 

cost

•

instance-ID—

ID of the spanning -tree instance (Range: 1-15).

•

cost—

The port path cost. (Range: 1 - 200,000,000)

Console(config)# 

interface ethernet

 

1/e1

Console(config-if)# 

spanning-tree mst

 1 

port-priority

 142

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands