manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 263

Radius Commands

263

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Example

The following example configures the timeout interval to 5 seconds.

r

adius-se

r

ve

r

 deadti

m

e

The 

radius-server deadtime

 Global Configuration mode command improves RADIUS response 

time when servers are unavailable. The command is used to cause the unavailable servers to be 
skipped. To return to the default configuration, use the 

no

 form of this command.

Syntax

radius-server deadtime

 

deadtime

no radius-server deadtime

•

deadtime

 — Length of time in minutes during which a RADIUS server is skipped over by 

transaction requests. (Range: 0 - 2000)

Default Configuration

The deadtime setting is 0.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example sets the deadtime to 10 minutes.

show 

r

adius-se

r

ve

r

s

The 

show radius-servers

 Privileged EXEC mode command displays the RADIUS server settings.

Syntax

show radius-servers

Default Configuration

This command has no default configuration.

Console(config)# 

radius-server timeout

 5

Console(config)# 

radius-server deadtime

 10

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands