manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 190

190

IP Addressing Commands

www

.dell.com | support.dell.com

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

i

p

 add

r

ess dhc

p

The 

ip address dhcp 

Interface Configuration (Ethernet, VLAN, port-channel) mode command 

acquires an IP address for an Ethernet interface from the Dynamic Host Configuration Protocol 
(DHCP) server. To deconfigure an acquired IP address, use the 

no

 form of this command.

Syntax

ip address dhcp

 [

hostname

 

host-name

]

no ip address dhcp

•

host-name

 — Specifies the name of the host to be placed in the DHCP option 12 field. 

This name does not have to be the same as the host name specified in the 

hostname

 

Global Configuration mode command. (Range: 1-20 characters)

Default Configuration

This command has no default configuration.

Command Mode

Interface Configuration (Ethernet, VLAN, port-channel) mode

User Guidelines

•

The 

ip address dhcp

 command allows any interface to dynamically learn its IP address by 

using the DHCP protocol. 

•

Some DHCP servers require that the DHCPDISCOVER message have a specific host name. 
The 

ip address dhcp

 

hostname

 

host-name

 command is most typically used when the host 

name is provided by the system administrator.

•

If the device is configured to obtain its IP address from a DHCP server, it sends a 
DHCPDISCOVER message to provide information about itself to the DHCP server on the 
network.

•

If the 

ip address dhcp

 command is used with or without the optional keyword, the DHCP 

option 12 field (host name option) is included in the DISCOVER message. By default, the 
specified DHCP host name is the globally configured host name of the device. However, the 

ip address dhcp hostname

 

host-name

 command can be used to place a different host name in 

the DHCP option 12 field.

•

The 

no ip address dhcp

 command deconfigures any IP address that was acquired, thus 

sending a DHCPRELEASE message. 

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands