manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 51

Command Modes

51

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

ip ssh server

Enables the device to be configured from a SSH server. 

lacp system-priority

Configures the system LACP priority.

line

Identifies a specific line for configuration and enters the line 
configuration command mode.

logging

Logs messages to a syslog server. 

logging buffered

Limits syslog messages displayed from an internal buffer based on 
severity. 

logging buffered size

Changes the number of syslog messages stored in the internal buffer.

logging console

Limits messages logged to the console based on severity. 

logging file

Limits syslog messages sent to the logging file based on severity. 

logging on

Controls error messages logging.

mac access-list

Creates Layer 2 ACLs.

management access-class

Defines which management access-list is used.

management access-list

Defines a management access-list, and enters the access-list for 
configuration.

management logging

Enables logging management access list events.

passwords aging

Sets the expiration time for passwords in the local database.

passwords history

Sets the number of required password changes before a password in the 
local database can be reused.

passwords history hold-time

Sets the number of days a password is relevant for tracking its 
password history.

passwords lockout

Sets the number of failed login attempts before a user account is 
locked.

passwords min-length

Sets the minimum required length for passwords in the local 
database.

power inline traps enable

Adds a description of the powered device type attached to the interface.

power inline usage-threshold

Configures the administrative mode of the inline power on an 
interface. 

priority-queue out num-of-
queues

Enables the egress queues to be SP queues.

qos

Enables Quality of Service (QoS) on the device and enters QoS basic 
or advance mode.

qos map dscp-queue

Modifies the DSCP to CoS map.

qos trust (Global)

Configure the system to "trust" state.

radius-server deadtime

Improves RADIUS response times when servers are unavailable. 

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands