manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 281

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

SNMP Commands

281

SNMP

 

Co

mm

ands

sn

m

p

-

s

e

r

ve

r

 c

o

mmu

n

ity

The 

snmp-server community

 Global Configuration mode command configures the community 

access string to permit access to the SNMP protocol. To remove the specified community string, 
use the 

no 

form of this command. 

Syntax

snmp-server community

 

community

 [

ro

 | 

rw

 | 

su

] [

ip-address

][

view

 

view-name

]

snmp-server community-group

 

community group-name

 [

ip-address

]

no snmp-server community 

community 

[

ip-address

]

•

community—

Community string that acts like a password and permits access to the 

SNMP protocol. (Range: 1-20 characters)

•

ro

—Indicates read-only access (default).

•

rw

—Indicates read-write access.

•

su

—Indicates SNMP administrator access.

•

ip-address

—Specifies the IP address of the management station.

•

group-name—Specifies the name of a previously defined group. A group defines the 
objects available to the community. (Range: 1-30 characters)

•

view-name

—Specifies the name of a previously defined view. The view defines the objects 

available to the community. (Range: 1-30 characters)

Default Configuration

No communities are defined.

Command Mode

Global Configuration mode

User Guidelines

•

The 

view-name

 parameter cannot be specified for 

su

, which has access to the whole MIB.

•

The 

view-name

 parameter can be used to restrict the access rights of a community string. 

When it is specified:

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands