manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 428

428

Web Server

www

.dell.com | support.dell.com

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

•

location

 — Specifies the location or city name. (Range: 1 - 64)

•

state

 — Specifies the state or province name. (Range: 1 - 64)

•

country

 — Specifies the country name. (Range: 2 - 2)

•

days

 — Specifies number of days certification is valid. (Range: 30 - 3650)

Default Configuration

The Certificate and SSL’s RSA key pairs do not exist.

If no certificate number is specified, the default certificate number is 1.

If no RSA key length is specified, the default length is 1024.

If no URL or IP address is specified, the default common name is the lowest IP address of the 
device at the time that the certificate is generated. 

If the number of days is not specified, the default period of time that the certification is valid 
is 365 days. 

Command Mode

Global Configuration mode

User Guidelines

•

The command is not saved in the device configuration; however, the certificate and keys 
generated by this command are saved in the private configuration (which is never displayed to 
the user or backed up to another device).

•

Use this command to generate a self-signed certificate for the device.

•

If the RSA keys do not exist, parameter 

key-generate

 must be used.

Example

The following example regenerates an HTTPS certificate.

c

r

y

p

to ce

r

tificate 

r

equest

The 

crypto certificate request

 Privileged EXEC mode command generates and displays 

certificate requests for HTTPS.

Syntax

crypto certificate 

number

 

request 

[

cn

 

common- name

 

]

[ou 

organization-unit

][or 

organization

] 

[loc 

location

] [st 

state

] [cu 

country

]

•

number

 — Specifies the certificate number. (Range: 1 - 2)

Console(config)# 

crypto certificate 

1

 generate key-generate

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands