manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 290

290

SNMP Commands

www

.dell.com | support.dell.com

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

sn

mp

-se

r

ve

r

 host

The 

snmp-server host 

Global Configuration mode command specifies the recipient of Simple 

Network Management Protocol Version 1 or Version 2 notifications. To remove the specified 
host, use the 

no 

form of this command.

Syntax

snmp-server host {

ip-address

 | 

hostname

} 

community-string

 [traps | informs]  [1 | 2]  [udp-

port 

port

] [filter 

filtername

] [timeout 

seconds

] [retries 

retries

]

no snmp-server host {

ip-address

 | 

hostname

} [traps | informs]

•

ip-address

—Specifies the IP address of the host (targeted recipient).

•

hostname

—Specifies the name of the host. (Range:1-158 characters)

•

community-string

—Specifies a password-like community string sent with the notification 

operation. (Range: 1-20)

•

traps

—Indicates that SNMP traps are sent to this host. If unspecified, SNMPv2 traps are 

sent to the host.

•

informs

—Indicates that SNMP informs are sent to this host. Not applicable to SNMPv1.

•

1

—Indicates that SNMPv1 traps will be used.

•

2

—Indicates that SNMPv2 traps will be used. If 

•

port

—Specifies the UDP port of the host to use. If unspecified, the default UDP port 

number is 162. (Range: 0-65535)

•

filtername

—Specifies a string that defines the filter for this host. If unspecified, nothing 

is filtered. (Range: 1-30 characters)

•

seconds

—Specifies the number of seconds to wait for an acknowledgment before 

resending informs. If unspecified, the default timeout period is 15 seconds. 
(Range: 1-300)

•

retries—Specifies the maximum number of times to resend an inform request. 
If unspecified, the default maximum number of retries is 3. (Range: 0-255)

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands