manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 158

158

Ethernet Configuration Commands

www

.dell.com | support.dell.com

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Example

In the following example, automatic crossover is enabled on port 1/e5.

back-

pr

essu

r

e

The 

back-pressure

 Interface Configuration (Ethernet) mode command enables back pressure 

on a given interface. To disable back pressure, use the 

no 

form of this command.

Syntax

back-pressure

no back-pressure

Default Configuration

Back pressure is enabled.

Command Mode

Interface Configuration (Ethernet) mode

User Guidelines

•

Back pressure cannot be configured on trunks.

Example

In the following example back pressure is enabled on port 1/e5.

clea

r

 counte

r

s

The 

clear counters 

User

 

EXEC mode command clears statistics on an interface.

Syntax

clear counters 

[

ethernet

 

interface 

| 

port-channel 

port-channel-number

]

•

interface — 

Valid Ethernet port.

 

(Full syntax: 

unit/port

)

•

port-channel-number — 

Valid port-channel number.

Console(config)# 

interface ethernet 

1/e5

Console(config-if)# 

mdix

 

auto

Console(config)# 

interface ethernet 

1/e5

Console(config-if)# 

back-pressure

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands