282
SNMP Commands
www
.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY
–
An internal security name is generated.
–
The internal security name for SNMPv1 and SNMPv2 security models is mapped to an
internal group name.
–
The internal group name for SNMPv1 and SNMPv2 security models is mapped to a view-
name (read-view and notify-view always, and for
rw
for write-view also)
•
The
group-name
parameter can also be used to restrict the access rights of a community
string. When it is specified:
–
An internal security name is generated.
–
The internal security name for SNMPv1 and SNMPv2 security models is mapped to the
group name.
•
The
no snmp-server community
command is used to remove a community or a community
group.
Examples
The following example defines community access string
public
to permit administrative access
to SNMP protocol at an administrative station with IP address 192.168.1.20.
sn
mp
-se
r
ve
r
view
The
snmp-server view
Global Configuration mode command creates or updates a Simple
Network Management Protocol (SNMP) server view entry. To remove a specified SNMP server
view entry, use the
no
form of this command.
Syntax
snmp-server view
view-name oid-tree
{included | excluded}
no snmp-server view
view-name
[
oid-tree
]
•
view-name
—Specifies the label for the view record that is being created or updated. The
name is used to reference the record. (Range: 1-30 characters)
•
oid-tree
—Specifies the object identifier of the ASN.1 subtree to be included or excluded
from the view. To identify the subtree, specify a text string consisting of numbers, such as
1.3.6.2.4, or a word, such as system. Replace a single subidentifier with the asterisk (*)
wildcard to specify a subtree family; for example 1.3.*.4. You may also identify the subtree
by specifying its logical name; for example, "IfEntry.*.1".
•
included
—Indicates that the view type is included.
•
excluded
—Indicates that the view type is excluded.
Console(config)#
snmp-server community
public
su
192.168.1.20
