Dell PowerConnect 3400 Series Cli Reference Manual Download Page 66

Page: 66 / 456

Using the CLI

www

.dell.com | support.dell.com

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Global Configuration Mode

Global Configuration mode commands apply to features that affect the system as a whole,
rather than just a specific interface. The

configure

Privileged EXEC mode command is used to

enter the Global Configuration mode.

To enter the Global Configuration mode, at the Privileged EXEC mode prompt enter the
command

configure

and press <Enter>. The Global Configuration mode prompt is displayed.

The Global Configuration mode prompt consists of the device host name followed by (config)
and

To return from the Global Configuration mode to the Privileged EXEC mode, the user can use
one of the following commands:

•

exit

•

end

•

Ctrl+Z

The following example illustrates how to access the Global Configuration mode and return to
the Privileged EXEC mode:

Interface Configuration Mode and Specific Configuration Modes

Interface Configuration mode commands modify specific interface operations. The following
are the Interface Configuration modes:

•

Line Interface

— Contains commands to configure the management connections. These

include commands such as line timeout settings, etc. The

line

Global Configuration mode

command is used to enter the Line Configuration command mode.

•

VLAN Database

— Contains commands to create a VLAN as a whole. The

vlan database

Global Configuration mode command is used to enter the VLAN Database Interface
Configuration mode.

•

Management Access List

— Contains commands to define management access-lists. The

management access-list

Global Configuration mode command is used to enter the

Management Access List Configuration mode.

Console(config)#

Console#

configure

Console(config)#

exit

Console#

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 3400 Series

Reviews:

Brands by name

Popular brands

Dell PowerConnect 3400 Series, Cli Reference Manual

Search results

Summary of Contents for PowerConnect 3400 Series

Reviews:

Brands by name

Popular brands