manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 338

338

SSH Commands

www

.dell.com | support.dell.com

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Default Configuration

Device configuration from a SSH server is enabled.

Command Mode

Global Configuration mode

User Guidelines

•

If encryption keys are not generated, the SSH server is in standby until the keys are generated. 
To generate SSH server keys, use the 

crypto key generate dsa

, and 

crypto key generate rsa

 

Global Configuration mode commands.

Example

The following example enables configuring the device from a SSH server.

c

r

y

p

to key gene

r

ate dsa

The 

crypto key generate dsa

 Global Configuration mode command generates DSA key pairs.

Syntax

crypto key generate dsa

Default Configuration

DSA key pairs do not exist.

Command Mode

Global Configuration mode

User Guidelines

•

DSA keys are generated in pairs: one public DSA key and one private DSA key. If the device 
already has DSA keys, a warning and prompt to replace the existing keys with new keys are 
displayed.

•

This command is not saved in the device configuration; however, the keys generated by this 
command are saved in the private configuration, which is never displayed to the user or 
backed up on another device. 

•

DSA keys are saved to the backup master.

•

This command may take a considerable period of time to execute.

Console(config)# 

ip ssh server

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands