manualshive.com logo in svg

Dell PowerConnect 3400 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3400 Series Cli Reference Manual Download Page 339

SSH Commands

339

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Example

The following example generates DSA key pairs.

c

r

y

p

to key gene

r

ate 

r

sa

The 

crypto key generate rsa 

Global Configuration mode command generates RSA key pairs.

Syntax

crypto key generate rsa

Default Configuration

RSA key pairs do not exist.

Command Mode

Global Configuration mode

User Guidelines

•

RSA keys are generated in pairs: one public RSA key and one private RSA key. If the device 
already has RSA keys, a warning and prompt to replace the existing keys with new keys are 
displayed.

•

This command is not saved in the device configuration; however, the keys generated by this 
command are saved in the private configuration which is never displayed to the user or backed 
up on another device. 

•

RSA keys are saved to the backup master.

•

This command may take a considerable period of time to execute.

Example

The following example generates RSA key pairs.

i

p

 ssh 

p

ubkey-auth

The 

ip ssh pubkey-auth

 Global Configuration mode command enables public key 

authentication for incoming SSH sessions. To disable this function, use the 

no

 form of this 

command.

Console(config)# 

crypto key generate dsa

Console(config)# 

crypto key generate rsa

Summary of Contents for PowerConnect 3400 Series









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands