manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 97

Brocade Adapters Installation and Reference Manual

69

53-1002144-01

Using the Brocade Adapter Software Installer

3

NOTE

The storage driver will claim all installed Brocade Fiber Channel HBAs, FCoE CNAs, and Fabric 
Adapter ports configured in HBA or CNA mode installed in a host system.

RHEL 6.x version x64 systems

The Brocade Adapter Software Installer and HCM are 32-bit applications. To use these applications 
on Linux RHEL 6.x version x64 systems, you must install the x32-compatible libraries because they 
are not installed by default. 

To install these libraries, use the following steps.

1. Install glibc.i686 or select “Compatibility Libraries” under “Base System” when installing RHEL 

6.x. 

2. Install the following RPMs once you install RHEL 6.x:

NOTE

These RPMs should be available under the Packages folder on the RHEL 6.0 or 6.1 DVD.

•

libX11-*.el6.i686.rpm

•

libXau-*.el6.i686.rpm

•

libXext-*.el6.i686.rpm

•

libXi-*.el6.i686.rpm

•

libXtst-*.el6.i686.rpm

•

libxcb-*.el6.i686.rpm

•

nss-softokn-freebl-*.el6.i686.rpm

•

glibc-*.el6.i686.rpm

Using the GUI-based installer

The Brocade Adapter Software Installer (BASI) GUI-based application or commands are the 
preferred methods to install the following components on your host system:

•

Storage and network drivers

•

Management Utilities. These include the HCM agent, BCU, BASI, installation scripts, CIM 
provider, and SNMP agent files.

•

HCM only

This application operates on systems specified under 

Table 9

 on page 44. To use the 

command-line version of this application, refer to 

“Software installation using Software Installer 

commands”

 on page 76. 

The Adapter Software Installer installs HCM, all driver packages, and management utilities based 
on your host operating system. The HCM Agent starts automatically after installation. You can also 
install software components using software installer scripts and “native” system commands (refer 
to 

“Using software installation scripts and system commands”

 on page 89).

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands