manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 76

48

Brocade Adapters Installation and Reference Manual

53-1002144-01

Items shipped with your adapter

1

Software installation options

You can use the Brocade Adapter Software Installer or options in “native” installation scripts and 
commands to install software on your host system:

•

Brocade Adapter Software Installer
Use this to install the following components:

-

Storage driver, network driver, and HCM

-

Storage and network driver 

-

HCM only

For more information, refer to 

“Using the GUI-based installer”

 on page 69. 

•

Brocade “native” installer scripts and commands
For CNAs, use this to install the storage driver, network driver, and utilities.

For HBAs and Fabric Adapter ports configured in HBA mode, use this to install the storage 
driver and utilities only.

For more information, refer to 

“Using software installation scripts and system commands”

 on 

page 89. 

NOTE

Only one driver installation is required for all types of adapters (CNA, HBA, or Fabric Adapter) 
installed in a host system.

Refer to 

“Software installation and driver packages”

 on page 43 for a complete list of driver and 

software installer packages that you can download from the Brocade adapter website at 

www.brocade.com/adapters

. On the adapters website,

 navigate to the Downloads page.

Items shipped with your adapter 

This section describes items shipped with your adapter. 

Stand-up adapters

The following items are shipped with stand-up adapters for installation:

•

Adapter with the following PCI mounting bracket installed, depending on your adapter model:

-

Low-profile PCI mounting bracket (all CNA and HBA models)

-

Standard (full-height) PCI mounting bracket (Fabric Adapters)

•

Loose adapter packaged with adapter, depending on your adapter model:

-

Standard (full-height) PCI mounting bracket (all CNA and HBA models)

-

Low-profile PCI mounting bracket (Fabric Adapters)

•

One SFP or two SFPs, depending on your adapter model. Note that for CNAs and Fabric 
Adapters, SFPs and copper cables may be purchased separately or shipped with the FCoE 
switch.

•

Adapter installation instructions

•

Instructions for downloading software

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands