Dell Brocade 825 Installation And Reference Manual Download Page 141

Page: 141 / 272

Brocade Adapters Installation and Reference Manual

113

53-1002144-01

HCM Agent operations

•

Starting the agent (agent restarts if system reboots).

chkconfig –-add hcmagentservice

•

Stopping the agent.

/usr/bin/hcmagentservice stop

•

Stopping the agent from restart after system reboots.

chkconfig –-del hcmagentservice

•

Changing the default communication port. Use the following steps.

a. Change to the agent installation directory (default is

/opt/brocade/adapter/hbaagent/conf).

b. Edit abyss.conf to change the entry “SecurePort 34568” to any other nonconflicting

TCP/IP port (for example, SecurePort 4430).

Managing the HCM Agent on Solaris systems

Use the following commands:

NOTE

The Brocade 804 and 1007 adapters are not supported on Solaris systems, so Solaris options do
not apply.

•

Determining agent operation

svcs hcmagentservice

•

Starting the agent (agent will not restart if system reboots or agent stops unexpectedly)

svcadm enable -t hcmagentservice

•

Starting the agent (agent restarts if system reboots)

svcadm enable hcmagentservice

•

Stopping the agent

svcadm disable -t hcmagentservice

•

Stopping the agent from restart after system reboots

svcadm disable hcmagentservice

•

Changing the default communication port

a. Change to the agent installation directory (default is

/opt/brocade/adapter/hbaagent/conf).

b. Edit abyss.conf to change the entry “SecurePort 34568” to any other nonconflicting

TCP/IP port (for example, SecurePort 4430).

Summary of Contents for Brocade 825

















































































































































































































































































Search results

Summary of Contents for Brocade 825

Reviews:

Brands by name

Popular brands

Dell Brocade 825, Installation And Reference Manual

Search results

Summary of Contents for Brocade 825

Reviews:

Brands by name

Popular brands