manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 15

Brocade Adapters Installation and Reference Manual

xv

53-1002144-01

Host operating system support

Refer to 

“Host operating system support for adapter drivers”

 on page xv for information on 

operating systems that support the Brocade Host Connectivity Manager (HCM), Brocade Command 
Line Utility (BCU), and adapter drivers.

Host operating system support for adapter drivers

This section lists operating system support for all models of the following types of Brocade 
adapters:

•

Fabric Adapters - Refer to the following subsections depending on your port mode and SFP 
configurations:

-

“FCoE support”

 on page xvi and 

“Ethernet support”

 on page xvi for ports configured in CNA 

mode.

-

“Fibre Channel support”

 on page xv, for ports configured in HBA mode.

-

“Ethernet support”

 on page xvi for ports configured in NIC mode.

•

CNAs- Refer to the following subsections:

-

“FCoE support”

 on page xvi 

-

“Ethernet support”

 on page xvi.

•

HBAs - Refer to 

“Fibre Channel support”

 on page xv.

NOTE

Specific operating system release levels, service pack levels, and other patch requirements are 
detailed in the current adapter release notes.

NOTE

Also refer to the latest Brocade interoperability matrices on the Brocade website at 

www.brocade.com/adapters

 for a list of supported host systems and operating systems

.

Fibre Channel support

The following lists operating systems that support Fibre Channel operation for HBAs and for Fabric 
Adapter ports configured in HBA mode:

•

Windows 2003 R2/SP2 (x86 and x64)

•

Windows Server 2008 (Longhorn) (x86 and x64)

•

Windows Server 2008 R2/SP1 (x64)

•

Microsoft Hyper V for Windows 2008 x86, x64

•

Windows 7 (x86 and x64)

•

Windows Server Core for Windows 2008 (x86 and x64)

•

Microsoft WinPE 3.0 for Windows 2008 (x86 and x64)

•

Linux RHEL4.9, 5.5, 5.6, 6.0, 6.1

•

Linux SLES 10 and 11 (x86 and x64)

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands