manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 110

82

Brocade Adapters Installation and Reference Manual

53-1002144-01

Using the Brocade Adapter Software Installer

3

•

To install HCM interactively.
Windows systems

brocade_adapter_software_installer_windows_<platform>_<version>.exe 

Linux systems

sh brocade_adapter_software_installer_linux_<version>.bin 

Solaris systems

sh brocade_adapter_software_installer_solaris10_x86_<version>.bin 

sh brocade_adapter_software_installer_solaris10_sparc_<version>.bin 

•

To install the noarch driver on Linux systems in silent mode.

sh brocade_adapter_software_installer_linux_<version>.bin 

-DCHOSEN_INSTALL_SET=DRIVER -DCONT_NOARCH_DRIVER=YES -i silent

Installing HCM and driver package in silent mode using file option

By identifying the default installation properties file after the software installer command, HCM, the 
storage driver, and the network driver are installed by default in silent mode. The HCM Agent starts 
automatically after installation. This is the recommended method for silent installation. 

NOTE

Brocade 804 and 1007 adapters are not supported on Solaris systems, so Solaris options in this 
section do not apply.

Use the following steps.

1. At the command line, change to the directory where the installer is located.

2. Use the following commands to initiate silent installation using the properties file.

•

Windows systems

brocade_adapter_software_installer_windows_<version>.exe -f 

HCMDefaultInstall.properties

•

Linux systems

brocade_adapter_software_installer_linux_<version>.bin -f 

HCMDefaultInstall.properties

•

Solaris systems

brocade_adapter_software_installer_solaris10_x86_<version>.bin -f 

HCMDefaultInstall.properties 

brocade_adapter_software_installer_solaris10_sparc_<version>.bin -f 

HCMDefaultInstall.properties 

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands