manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 38

10

Brocade Adapters Installation and Reference Manual

53-1002144-01

Converged network adapters

1

The Brocade 1741 mounts on supported blade servers that install in Dell™ PowerEdge™ M1000e 
modular blade systems. It is used in conjunction with matching I/O modules, also installed in the 
blade enclosure. The adapter uses FCoE to converge standard data and storage networking data 
onto a shared Ethernet link. Ethernet and Fibre Channel communications are routed through the 
DCB ports on the adapter to the enclosure backplane then to the I/O module.

For information on installing the Brocade 1741 CNA on a blade server, refer to 

Chapter 2, 

“Hardware Installation”

. For additional information related to the supported server blade, blade 

enclosure, and other devices installed in the enclosure such as I/O and switch modules, refer to 
the installation instructions provided with these products.

Hardware compatibility

This section outlines important compatibility information.

SFP transceivers (stand-up adapters)

Use only the Brocade-branded small form factor pluggable (SFP) transceivers described in 

Table 4

 

in Brocade stand-up CNAs. The table provides the type, description, and switch compatibility 
information for supported SFPs.

Host systems and switches (stand-up adapters)

For a current list of switches, servers, and applications compatible with Brocade stand-up 
adapters, refer to the latest interoperability matrixes on Brocade’s website at 

www.brocade.com/adapters

. 

TABLE 4

Compatible SFPs for Brocade stand-up CNAs

10 Gbps SR (short range) 
SFP+, 1490 NM

Optical short range SFP+ for 
Distance depends on cable 
type. Refer to 

“Cabling 

(stand-up adapters)”

 on 

page 183.

Any switch compatible with 
the adapter

10 Gbps LR (long range) 
SFP+, 10 km, 1310 NM

Optical long range SFP+ for 
fiber optic cable 10 km (6.2 
mi.)

Any switch compatible with 
the adapter

1 meter direct-attached 
SFP+ copper cable

SFP+ for 1-meter (3.2 feet) 
maximum twinaxial copper 
cable

Any switch compatible with 
the cable.

3 meter direct-attached 
SFP+ copper cable

SFP+ for 3-meter maximum 
twinaxial copper cable (9.8 
feet)

Any switch compatible with 
the cable.

5 meter direct-attached 
SFP+ copper cable

SFP+ for 5-meter maximum 
twinaxial copper cable (16.4 
feet)

Any switch compatible with 
the cable.

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands