manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 11

Brocade Adapters Installation and Reference Manual

xi

53-1002144-01

About This Document

In this chapter

•

How this document is organized  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  xi

•

Supported adapter hardware and software  . . . . . . . . . . . . . . . . . . . . . . . . .  xiii

•

Host operating system support for adapter drivers  . . . . . . . . . . . . . . . . . . .   xv

•

Host operating system support for HCM . . . . . . . . . . . . . . . . . . . . . . . . . . .   xvii

•

What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  xviii

•

Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  xviii

•

Notice to the reader  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   xx

•

Additional information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   xx

•

Providing details for support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   xxii

•

Document feedback  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  xxvii

How this document is organized

This manual provides installation and reference information on Brocade host bus adapters (HBAs), 
converged network adapters (CNAs), and Fabric Adapters. It is organized to help you find the 
information that you want as quickly and easily as possible.

The document contains the following components:

•

Chapter 1, “Product Overview,” provides a detailed product overview and description. 
Information on adapter hardware and software compatibility is also included.

•

Chapter 2, “Hardware Installation,” provides procedures to install adapter hardware and 
connect to the fabric or switch. Also included are procedures to verify hardware and software 
installation.

•

Chapter 3, “Software Installation,” provides procedures to install software, such as the 
Brocade Host Connectivity Manager (HCM) and driver packages. Also included are instructions 
to verify software and hardware installation. Use this chapter to install software on the host 
system where you have installed the adapter.

•

Chapter 4, “Boot Code,” describes host boot support available on the adapter and provides an 
introduction to boot over SAN. It also includes procedures to update adapter boot code, 
configure boot over SAN, and configure fabric-based boot over SAN. Use this chapter when 
configuring a host to boot its operating system from a boot device located somewhere on the 
SAN instead of the host’s local disk or direct-attached storage.

•

Chapter 5 “Specifications,” includes details on adapter physical characteristics, LED operation, 
environmental requirements, and power requirements. Also included are Fibre Channel 
standards, regulatory, and safety compliancy information.

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands