Dell Brocade 825 Installation And Reference Manual Download Page 212

Page: 212 / 272

184

Brocade Adapters Installation and Reference Manual

53-1002144-01

Converged Network Adapters

Adapter LED operation (stand-up adapters)

Figure 19

illustrates LED indicator locations on a Brocade 1020 (A) and a Brocade 1010 (B)

stand-up CNA. LED indicators for each port are visible through the mounting brackets.

FIGURE 19

LED locations for Brocade 1020 CNA (A) and Brocade 1010 CNA (B)

Table 21

describes operation for the following LEDs visible on the CNA:

•

Lnk - Link state (up or down).

•

Act - Storage or network activity (traffic) is occurring over the Ethernet link.

•

Storage (icons) - FCoE activity is occurring over link.

TABLE 21

LED operation

Lnk

Act

Storage

State

Off

Adapter not operational. It may not be powered up or
not initialized.

Slow flashing
green

Off

Adapter is operational, but the physical link is down.

Steady green

Off

Link is up. No Ethernet or storage traffic.

Steady green

Off

Fast flashing
green

Link is up. Storage traffic only.

Steady green

Fast flashing
green

Off

Link is up. Ethernet traffic only.

Steady green

Fast flashing
green

Link is up. Both Ethernet and storage traffic.

Lnk Act

PORT

Lnk Act

Summary of Contents for Brocade 825

















































































































































































































































































Search results

Summary of Contents for Brocade 825

Reviews:

Brands by name

Popular brands

Dell Brocade 825, Installation And Reference Manual

Search results

Summary of Contents for Brocade 825

Reviews:

Brands by name

Popular brands